Suitability
Direct marketing: Yes
Reactive power control: Yes
Device configuration
The inverter and the data logger must be in the same network. With the Teltonika RUT supplied, the "LAN" port (pay attention to the labeling) can be used for this purpose. It is recommended to set a fixed IP for the inverter. In the standard configuration of the supplied router, the range 192.168.1.10 - 192.168.1.99 can be used for this.
Then select "Network" as the connection type in the digital twin, enter the model of the inverter and the IP. Set the "Slave Id" to 3 and the port to 502.
With an optional communication module from SMA, the connection can also be made via RS485. In this case, please select "RS485" as the connection type and enter the RS485 port used in the log under "Port". The serial number of the device is mandatory for this. The "Slave Id" can be set to any value between 1-99 as long as it is only used once on the respective RS485 port.
⚠ Note:
The following configuration steps must be carried out on the device itself via Sunny Explorer. A password for the login and an SMA Grid Guard password may be required for this.
For communication via Ethernet (recommended):
- Device parameters -> External communication -> Ethernet -> Modbus -> TCP server -> Switched on - Yes
- Device parameters -> External communication -> Ethernet -> Modbus -> UDP server -> Switched on - Yes
Need More Help?
If you encountered any difficulties or need further assistance, here are some steps you can take:
Contact Support:
- Email: Reach out to our support team by emailing us at support@amperecloud.com. Provide as much detail as possible about the issue you're facing.
Phone Support:
-
Call our customer service at
+49 30 6293 77201. Our support hours are Monday to Friday, 9 AM to 5 PM (local time).
Share Your Feedback
If this article didn’t meet your needs or if you have suggestions on how we can improve, please let us know by submitting feedback. Your input helps us enhance our resources and support.